1. Home
  2. Concrete yards
  3. Sheffield

Concrete yard contractors in Sheffield

PKB Civils is a specialist concrete yard contractor for manufacturing and distribution sites in Sheffield and Rotherham, from Tinsley Park by the M1 to the Advanced Manufacturing Park at Waverley. We send our own crews and plant from Rochdale to build new heavy-duty yards and relay failing ones a bay at a time.

  • Keeping Clients Operational
  • Works Phased Around Your Site
  • Our Own Crews and Plant
  • Principal Contractor

Concrete yards for Sheffield's manufacturers and distributors

Send your brief

For managers of Sheffield and Rotherham yards that take forklifts, loading shovels and HGVs every day and are starting to show it, from cracked bays at the loading doors to patches that keep breaking up. We build the yard itself: the failed concrete is cut out, the sub-base rebuilt and new reinforced slabs laid, all by our own crews.

In the council's 2009 Core Strategy, the Lower Don Valley comes first among Sheffield's locations for manufacturing, distribution and warehousing, and Attercliffe/Newhall and Parkway/Kettlebridge, with their large concentrations of industry and warehousing, are kept for that work. For a yard on those estates, that means heavy traffic for years to come, so it pays to specify for it now and not patch it later. New yards, resurfacing and repairs are all part of our concrete yard work.

2,000+Projects completed across the UK
150,000m²Concrete poured across all our jobs
40yearsFamily-run in Rochdale since 1986

Concrete yards in Sheffield: what we do

Everything we can take on for you. Not sure which you need? Send your brief and we will tell you.

  • Yards for heavy manufacturing

    Reinforced slabs for forging, casting and engineering works, specified for the plant and axle loads that really use them.

    Send your brief
  • Yards off the motorway junctions

    Hardstanding for Tinsley Park's warehousing, where HGVs come straight off the motorway and brake and turn hardest at the gates.

    Send your brief
  • Bays relaid in turn

    Failed areas cut out and relaid one at a time, each back in use before the next closes, so loading doors stay reachable.

    Send your brief
  • Repairs that reach the ground

    Patches that keep failing cut back to sound material and rebuilt from below, so the repair outlasts the last one.

    Send your brief
  • Yards beside new buildings

    New yards for manufacturing and research units at Waverley, set to the levels and falls the drainage design needs from day one.

    Send your brief
  • Machine bases

    Reinforced bases for presses, compressors and racking, poured inside a yard that keeps working around them.

    Send your brief

Why Sheffield sites choose us for concrete yards

The same people survey, plan and build your job, and your site keeps running while we do it.

Send your brief
  • Slabs on a live steel site

    At our steel job in Scunthorpe, the new external slabs went in beside a crane runway on a site that stayed live, each stage in the right sequence after the demolition and the ground preparation for the piles.

  • Specified for Sheffield's loads

    Our starting point for an HGV yard is reinforced concrete at least 200mm thick on A252 mesh, going heavier at Tinsley Park's gates or wherever loading shovels work on a valley-floor yard. Ben's rule for an HGV base is that its level, its thickness and its joints all have to be right, because formwork set out badly turns a cosmetic fault into a structural one.

  • Two yards, two specifications

    Before a Sheffield yard is priced, the survey records what actually drives on it, from loading shovels at a forge to HGVs off the M1, and what it stands on. The slab is specified from that, which is why two yards on the same estate can need different concrete.

Is your Sheffield yard holding you back?

Send us a short brief and a few photos. If it's a good fit, we'll arrange a free site survey and plan the work around how your site runs.

Send your brief

What breaks yards in Sheffield and Rotherham

What we look for first when a heavy-duty Sheffield yard starts to fail.

  • Freight handling areas

    Where a Tinsley Park site handles freight with loading plant, that plant turns and brakes on the same few square metres all day. Those areas fret and crack long before the rest of the yard, and need a heavier slab with the joints kept out of the plant's path.

  • Yards on a slope

    On a sloping Sheffield site, the yard's falls have to send water into the channels before it runs off the edge, so the falls are fixed from the drainage layout and checked on the ground before every pour.

  • Redeveloped once already

    Many of Rotherham's old steel and mining sites have been redeveloped (civil engineering in Sheffield has the background), and a yard laid then may now carry more than it was built for.

  • A patch that keeps sinking

    Infilled ponds are among the potentially contaminated sites Sheffield's council has listed, so a yard that keeps settling in one patch may be over one, as earthworks in Sheffield explains.

What our clients say

Feedback from the people who run these sites, shown with the job we did for them.

1 / 3
External groundworks and new concrete
It was a complex job on a live site and your team handled it well from start to finish. Really happy with how it all came together and the site was handed over exactly as we needed it.
External groundworks and new concreteScunthorpe, Manufacturing, 24 weeksSee the job

What ground and site conditions should you expect in Sheffield?

What a Sheffield yard stands on depends on where it is. On the valley floor it is often thin river deposits, soft near the surface (groundworks in Sheffield has the detail), and on a former works plot there may be steelworks fill above them that changes from one bay to the next (earthworks in Sheffield). Either way, the sub-base is designed for what the survey finds before a slab thickness is chosen.

What it carries depends on the estate. At Tinsley Park the same 2009 plan makes industry and warehousing/distribution the major land uses, making particular use of rail freight facilities, and notes the area is conveniently located for the M1 at junction 33 and junction 34. A yard there takes HGVs straight off the motorway at its gates, where braking and turning are hardest, so the gates get the heaviest slab and a brushed, slip-resistant finish, and any area where freight is handled gets a heavier specification of its own.

On the Lower Don Valley floor, a yard may also have been under water at some point (drainage in Sheffield covers the valley's flood history), and a sub-base that was flooded and only patched since is worth checking before any resurfacing.

When new concrete isn't the right call

A pothole on otherwise sound ground can be cut out and repaired on its own. The trouble starts when the ground under it has gone, and on soft valley deposits or old works fill that is the first thing to check. In Ben's words, “A pothole gets filled. But if the sub-base beneath it has failed, the fill will break down again within months.” Each patch also leaves a fresh joint edge for the next failure to start from, as he explains in his piece on reactive yard maintenance.

And on a former works plot where old fill under the yard is the real problem, the answer starts with earthworks: the poor fill comes out and is replaced before any new concrete goes down.

A local track record

Postcode districts in Sheffield, Rotherham and north Derbyshire where we've delivered: S9, S44, S60, S65, S80.

See them on the map
2,000+Projects completed across the UK
1986The year PKB started in Rochdale

Questions about concrete yards in Sheffield

Can't see your question? Call us or send your brief and we'll come back to you.

Send your brief
Do you lay yards for Sheffield's steel and forging works?

Yes. Steel sites put heavy, concentrated loads on a yard, from stock and cranes to loaders working every shift. A Sheffield works gets a slab specified for its own heaviest loads and thickened where they concentrate, with the joints set out around the plant that uses it.

Do you take on yards at Markham Vale and in north Derbyshire?

Yes. Markham Vale, reached by its own M1 junction, 29a, will deliver over 127 ha of employment development across Chesterfield, Bolsover and North East Derbyshire, according to Chesterfield Borough Council. New units there need yards built for HGVs from the start, and the survey is free there just as it is in Sheffield.

Does the Clean Air Zone affect concrete deliveries to a central Sheffield yard?

It can. Ready-mix arrives in HGVs, and the Clean Air Zone charges non-compliant ones inside Sheffield's inner ring road and city centre. For a yard inside that area, the supplier's fleet and delivery times are worth settling before the pour is booked. Civil engineering in Sheffield has the zone's rules.

Do you lay yards at the Advanced Manufacturing Park in Rotherham?

Yes. The Advanced Manufacturing Park was developed on 150 acres within the wider 740-acre Waverley neighbourhood, with manufacturers and research centres side by side. A new yard there is laid beside buildings that keep working, to levels and falls that keep water away from their doors.

Can a concrete yard go on ground that was remediated after a works closed?

Yes, once the formation is tested and the remediation scheme allows for it. A cover layer or treated ground has to stay intact, so the scheme and the ground report set what can be dug into, and the sub-base is built up on top to the levels the scheme allows. On Sheffield's reclaimed land, that check comes before the slab is designed.

Ben Duffy

Written by Ben Duffy

Director, PKB Civils. Page reviewed

Ben has over 10 years of experience in contracting management, specialising in pre-construction with some of the UK's largest contractors. Ben now leads pre-construction, project planning and client engagement.

Got a yard that's holding you back?

Tell us what's happening on site. We'll review your brief and, if it's a good fit, arrange a free site survey.

Call usSend your brief